Hey guys, I have a clock setup that moves pistons... But the pistons do not stay up long enough for what I want. Is there anything that I can do to delay the pistons going back down for a few more seconds? Thanks
You want a monostable circuit. You can find it in this thread, as well as all your other redstone needs.
or simpler: Piston l L_____ Rep....... Rep l............ Rep l ............Rep L______ l Button Rep = Repeater (all in same direction) l L _ = Redstone . = blanks disapeared in post The signal will reach the Piston in 1 tick (1 repeater on the left) if the Button is off again the right repeaters will turn off after the number of ticks you choose, storing the signal for a time.
That's not intelligible at all. I'd recommend posting a screenshot of whatever you're trying to convey. @CallMeTom: Do you have a solution yet? I figured I would post a picture from the circuit I recommended: By placing more repeaters along the line on the top and right, you can lengthen the signal as much as you wish.
Thanks for your input guys, I've found a solution with the help of Terr. Instead of trying to turn the piston 'on' for 'x amount of time' I have reversed it and it put a Redstone torch in the system to make the piston always 'on' and got the clock to turn the piston 'off'.
I'll try tuesday again, it's allready 10PM here and I have to get up early tomorow for the Karneval Parade^^